GENERAL® MMD7NP Pinless Moisture Meter With Tricolor Bar Graph, 0 to 53% Softwood, 0 to 35% Hardwood Moisture Content, +/-4 % Accuracy, LCD Display

For DIY enthusiasts, woodworkers, contractors, building inspectors and water damage remediators

9 V Battery

• Determine the moisture content of softwood, hardwood and other building materials (like drywall and masonry) or check water damaged areas to see if moisture is still present
• Protect your work surfaces - there are no pins on this tool, so your walls and projects can be saved from pinholes, scuffing and scratching to figure out their moisture levels
• Visual and audible alerts - if you're looking for the source of a leak behind your work surfaces, listen for the high pitch tones to give you an accurate read on where moisture is most concentrated or quickly see using the tricolor LED moisture indicator
• Even without pins, this tool can read the moisture levels up to a 3/4 in deep into the surface with an overall measurement range of 0 to 53% for softwood, 0 to 35% for hardwood and relative readings for wallboard and masonry
• Easy to read and use - auto calibrating, 2 in diagonal backlit LCD screen and a 3-color LED bar graph, hold button, auto power-off function, out of range alarm and low battery
• First step in mold prevention - by checking suspicious water stains with a moisture tester around the house, you can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried
• Measurement ranges - 0 to 53% for softwood, 0 to 35% for hardwood, relative readings for wallboard and masonry
• Out-of-range alarm levels - >17% for wood, >70% for drywall and masonry
• Display type and size - 99.9 count, 2 in (51 mm) diagonal LCD with 1/2 in (13 mm) high digits

PROP65: This product can expose you to chemicals including di2-ethylhexylphthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

1 year Limited